3LG Datasheet
CrystalFree™ Oscillator
Solder Reflow Profile
Absolute Maximum Ratings
Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. These ratings are
stress specifications only. Functional operation of product at
these or under any condition beyond those listed in the
operating specifications is not implied. Exposure to absolute
maximum rated conditions may affect product reliability.
40 sec (max)
245°C
250
200
150
100
50
(260°C max)
217°C
150°C
60-150
sec
60-180
sec
Item
VDD
Maximum Absolute Rating
4.6V
OE
-0.5V to VDD + 0.5V
-0.5V to VDD + 0.5V
-65°C to 150°C
OUT / OUTB
Storage Temperature
Time
Output Waveform
Pin Descriptions
TR
TF
Pin # Name
Description
OE1
N/C
Output enable (0 = Output Disabled)
Do not connect
Ground
80%
1
2
3
4
5
6
VA
VM
GND
OUT2
OUTB2
VDD
Positive Output
Negative Output
Power
20%
1. Pulled high internally
2. Weak pull down to GND
t1
SYM = t1 / t2
t2
Ordering Information
22.5792
125.000
4
B
8
C T G
3 L G 1
C
Package
Suffix
Minimum Order Quantity (MOQ)
Factory Order Increment (FOI)
T & R
Bulk
T & R
Bulk
CUG
CTG
2500
2500
1250 (25 Tubes)
1190 (17 Tubes)
2500
2500
1250 (25 Tubes)
1190 (17 Tubes)
Output
Voltage
Frequency
24 to 125MHz*
Package
Shipping
B: 3.3V
C: 2.5V
CUG: 7.0 x 5.0 x 0.85
CTG: 5.0 x 3.2 x 0.85
Blank: Tubes
2: HCSL
3: LVPECL
4: LVDS
8:
Tape and Reel
* See frequency table or contact IDT
Sales
Technical Support
800-345-7015 (inside USA)
+1 408-284-8200 (outside USA)
Fax: 408-284-2775
crystalfreetechsupport@idt.com
+1 408-360-5656
6024 Silver Creek Valley Road
San Jose, California 95138
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of
product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when
installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied
warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a
manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.
Copyright 2010, 2011. All rights reserved.
Oct 24, 2011
www.IDT.com
©2011 Integrated Device Technology, Inc
IDT [ INTEGRATED DEVICE TECHNOLOGY ]
