DATASHEET
3.3 VOLT ZERO DELAY LOW SKEW BUFFER
Description
The ICS2305 is a low phase noise, high-speed PLL
based, low-skew zero delay buffer. Based on IDT’s
proprietary low jitter Phase Locked Loop (PLL)
techniques, the device provides four low skew outputs
at speeds up to 133 MHz at 3.3 V. The outputs can be
generated from the PLL (for zero delay), or directly from
the input (for testing), and can be set to tri-state mode
or to stop at a low level. The PLL feedback is on-chip
and is obtained from the CLKOUT pad.
The ICS2305 is available in two different versions. The
ICS2305-1 is the base part. The ICS2305-1H is a high
drive version with faster rise and fall times.
ICS2305
Features
•
•
•
•
•
•
•
•
•
•
•
Clock outputs from 10 to 133 MHz
Zero input-output delay
Four low skew (<250 ps) outputs
Device-to-device skew <700 ps
Full CMOS outputs with 25 mA output drive
capability at TTL levels
5 V tolerant CLKIN
Tri-state mode for board-level testing
Advanced, low power, sub-micron CMOS process
Operating voltage of 3.3 V
Industrial temperature range available
Packaged in 8-pin SOIC
Block Diagram
VDD
CLKIN
PLL
CLKOUT
CLK1
CLK2
CLK3
CLK4
GND
IDT™ / ICS™
3.3 VOLT ZERO DELAY LOW SKEW BUFFER
1
ICS2305
REV F 051310