ICS1893AF Data Sheet - Release
Chapter 10 DC and AC Operating Conditions
10.4 DC Operating Characteristics
This section lists the ICS1893AF DC operating characteristics.
10.4.1 DC Operating Characteristics for Supply Current
Table 10-4 lists the DC operating characteristics for the supply current to the ICS1893AF under various
conditions.
Note: All VDD_IO measurements are taken with respect to VSS (which equals 0 V).
Table 10-4. DC Operating Characteristics for Supply Current
Parameter
Operating Mode
100Base-TX‡
Symbol
IDD_IO
Min. Typ.
Max. Units
Supply Current†
–
–
–
–
–
–
–
–
–
8
110
5
11
125
8
mA
mA
mA
mA
mA
mA
mA
mA
mA
IDD
Supply Current†
Supply Current†
Supply Current†
Supply Current†
10Base-T‡
Auto-Negotiation
Power-Down
Reset
IDD_IO
IDD
150
5
160
8
IDD_IO
IDD
80
3
90
5
IDD_IO
IDD
4
5
IDD
10
11
† These supply current parameters are measured through VDD pins to the ICS1893AF. The supply current
parameters include external transformer currents.
‡ Measurements taken with 100% data transmission and the minimum inter-packet gap.
10.4.2 DC Operating Characteristics for TTL Inputs and Outputs
Table 10-5 lists the 3.3-V DC operating characteristics of the ICS1893AF TTL inputs and outputs.
Note: All VDD_IO measurements are taken with respect to VSS (which equals 0 V).
Table 10-5. 3.3-V DC Operating Characteristics for TTL Inputs and Outputs
Parameter
Symbol
VIH
Conditions
VDD_IO = 3.47 V
VDD_IO = 3.47 V
Min. Max. Units
TTL Input High Voltage
TTL Input Low Voltage
TTL Output High Voltage
TTL Output Low Voltage
–
–
2.0
–
–
0.8
–
V
V
V
V
V
VIL
VOH
VOL
VDD_IO = 3.14 V IOH = –4 mA
VDD_IO = 3.14 V IOL = +4 mA
VDD_IO = 3.14 V IOH = –4 mA
2.4
–
0.4
–
TTL Driving CMOS,
Output High Voltage
VOH
2.4
TTL Driving CMOS,
Output Low Voltage
VOL
VDD_IO = 3.14 V IOL = +4 mA
–
0.4
V
ICS1893AF, Rev D 10/26/04
October, 2004
Copyright © 2004, Integrated Circuit Systems, Inc.
All rights reserved.
112
IDT [ INTEGRATED DEVICE TECHNOLOGY ]
