欢迎访问ic37.com |
会员登录 免费注册
发布采购

1893AFLFT 参数 Datasheet PDF下载

1893AFLFT图片预览
型号: 1893AFLFT
PDF下载: 下载PDF文件 查看货源
内容描述: [SSOP-48, Reel]
分类和应用: 网络接口电信集成电路电信电路光电二极管
文件页数/大小: 136 页 / 1040 K
品牌: IDT [ INTEGRATED DEVICE TECHNOLOGY ]
 浏览型号1893AFLFT的Datasheet PDF文件第50页浏览型号1893AFLFT的Datasheet PDF文件第51页浏览型号1893AFLFT的Datasheet PDF文件第52页浏览型号1893AFLFT的Datasheet PDF文件第53页浏览型号1893AFLFT的Datasheet PDF文件第55页浏览型号1893AFLFT的Datasheet PDF文件第56页浏览型号1893AFLFT的Datasheet PDF文件第57页浏览型号1893AFLFT的Datasheet PDF文件第58页  
ICS1893AF Data Sheet - Release  
Chapter 7 Functional Blocks  
7.6.2.7 Management Frame Turnaround  
A valid management frame includes a turn-around field (TA), which is a 2-bit time space between the  
REGAD field and the Data field. This time allows an ICS1893AF and an STA to avoid contentions during  
read transactions. During an operation that is a:  
Read, an ICS1893AF remains in the high-impedance state during the first bit time and subsequently  
drives its MDIO pin to logic zero for the second bit time.  
Write, an ICS1893AF waits while the STA transmits a logic one, followed by a logic zero on its MDIO pin.  
7.6.2.8 Management Frame Data  
A valid management frame includes a 16-bit Data field for exchanging the register contents between the  
ICS1893AF and the STA. All Management Registers are 16 bits wide, matching the width of the Data field.  
During a transaction that is a:  
Read, (OP is 10b) the ICS1893AF obtains the contents of the register identified in the REGAD field and  
returns this Data to the STA synchronously with its MDC signal.  
Write, (OP is 01b) the ICS1893AF stores the value of the Data field in the register identified in the  
REGAD field.  
If the STA attempts to:  
Read from a non-existent ICS1893AF register, the ICS1893AF returns logic one for all bits in the Data  
field, FFFFh.  
Write to a non-existent ICS1893AF register, the ICS1893AF isolates the Data field of the management  
frame from every reaching the registers.  
Note: The first Data bit transmitted and received is the most-significant bit of a Management Register, bit  
X.15.  
7.6.2.9 Serial Management Interface Idle State  
The MDIO signal is in an idle state during the time between STA transactions. When the Serial  
Management Interface is in the idle state, the ICS1893AF disables (that is, tri-states) its MDIO pin, which  
enters a high-impedance state. The ISO/IEC 8802-3 standard requires that an MDIO signal be idle for at  
least one bit time between management transactions. However, the ICS1893AF does not have this  
limitation and can support a continual bit stream on its MDIO signals.  
ICS1893AF
Copyright © 2004, Integrated Circuit Systems, Inc.  
All rights reserved.  
54  
 复制成功!