T-1, (3-mm) Round, Quad-level PCB Mount
LED Indicator, J94B Series
The J94B is a right-angle view assembly of 4 T-1 LEDs arranged in a column and can be CMOS driven to save components. This indica-
tor array is designed to be the extension of the J78B and J83B. When used in conjunction with the J78B and/or J83B the lower LEDs line
up both vertically and horizontally with the lamps in the latter. Recommended pitch is 4.4 mm(0.173") when a large number of units are
placed side-by-side. This would allow intermixing 4-high, 3-high and 2-high indicators on the same panel.
4.3(0.17")
3.5
3
9.9
(0.39")
5.08(0.2")
5.08(0.2")
5.08(0.2")
2.54(0.1")
20.1
(0.79")
2.8
(.11)
+ –
(Pinout for single color)
Green
Anode
Red or
yellow
Anode
1.9
(.075)
(typ for bi-color)
Specify part desired as follows:
J94B/Order Code LED1 + Order Code LED 2 + Order Code LED 3 + Order Code LED 4
For example:
“J94B/I+Y+2G” designates an assembly with a red LED on top, a yellow LED in the middle and 2 green
LED's on the bottom. Note: Special lead length lamps are needed for position 1. Limited choices only.
ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT)
LED Lamp
Epoxy & Type
Color
Order Code
Peak
λ
(nm)
639
575
591
Typical Characteristics
Vf
(V)
@If=20mA
1.8
1.7
1.85
Iv
(mcd)
@If=2 mA
4.0
2.5
4.0
2
Θ
1/2
(Deg)
50
60
45
Recom.
Op. If
(mA)
Red
TInted Diffused
Green
Yellow
I
G
Y
2 - 10
2 - 10
2 - 10
* Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise.
IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A
IDEA [ IDEA.LNC. ]
