欢迎访问ic37.com |
会员登录 免费注册
发布采购

ICS9176-01 参数 Datasheet PDF下载

ICS9176-01图片预览
型号: ICS9176-01
PDF下载: 下载PDF文件 查看货源
内容描述: 低偏移的输出缓冲器 [Low Skew Output Buffer]
分类和应用:
文件页数/大小: 8 页 / 381 K
品牌: ICS [ INTEGRATED CIRCUIT SYSTEMS ]
 浏览型号ICS9176-01的Datasheet PDF文件第2页浏览型号ICS9176-01的Datasheet PDF文件第3页浏览型号ICS9176-01的Datasheet PDF文件第4页浏览型号ICS9176-01的Datasheet PDF文件第5页浏览型号ICS9176-01的Datasheet PDF文件第6页浏览型号ICS9176-01的Datasheet PDF文件第7页浏览型号ICS9176-01的Datasheet PDF文件第8页  
Integrated
Circuit
Systems, Inc.
ICS9176-01
Low Skew Output Buffer
General Description
the ICS9176-01
is designed specifically to support the tight
timing requirements of high-performance microprocessors
and chip sets. Because the jitter of the device is limited to
±250ps, the
ICS9176-01
is ideal for clocking Pentium™
systems. The 10 high drive (40mA), low-skew (±250ps)
outputs make the
ICS9176-01
a perfect fit for PCI clocking
requirements.
The
ICS9176-01
has 10 outputs synchronized in phase and
fre-quency to an input clock. The internal phase locked loop
(PLL) acts either as a 1X clock multiplier or a 1/2X clock
multiplier depending on the state of the input control pins T0
and T1. With metal mask options, any type of ratio between
the input clock and output clock can be achieved, including
2X.
The PLL maintains the phase and frequency relationship be-
tween the input clock and the outputs by externally feeding
back FBOUT to FBIN. Any change in the input will be tracked
by all 10 outputs. However, the change at the outputs will
happen smoothly so no glitches will be present on any driven
input. The PLL circuitry matches rising edges of the input
clock and the output clock. Since the input to FBIN skew is
guaran-teed to ±500ps, the part acts as a “zero delay” buffer.
The
ICS9176-01
has a total of eleven outputs. Of these,
FBOUT is dedicated as the feedback into the PLL and another,
Q/2, has an output frequency half that of the remaining nine.
These nine outputs can either be running at the same speed as
the input, or at half the frequency of the input. With Q/2 as the
feedback to FBIN, the nine ‘Q’ outputs will be running at twice
the input frequency in the normal divide-by-1 mode. In this
case, the output can go to 120 MHz with a 60 MHz input clock.
The maximum rise and fall time of an output is 1ns and each is
TTL-compatible with a 40mA symmetric drive.
The
ICS9176-01
is fabricated using CMOS technology which
results in much lower power consumption and cost compared
with the gallium arsenide based 1086E. The typical operating
current for the
ICS9176-01
is 60mA versus 115mA for the
GA1086E.
Features
ICS9176-01-01
is pin compatible with Triquint GA1086
±500ps skew (max) between input and outputs
±250ps skew (max) between outputs
10 symmetric, TLL-compatible outputs
28-pin PLCC or 28-pin wide SOIC surface mount
package
High drive, 40mA outputs
Power-down option
Output frequency range 20 MHz to 120 MHz
Input frequency range 20 MHz to 100 MHz
Ideal for PCI bus applications
Functionality
FS1
0
0
1
1
FS0
0
1
0
1
DESCRIPTION
Power-down
Test Mode (PLL Off CLK=outputs)
Normal (PLL On)
Divide by 2 Mode
Block Diagram
Pentium is a trademark of Intel Corporation.
ICS9176-01-01RevB061297P
ICS reserves the right to make changes in the device data identified in this publication
without further notice. ICS advises its customers to obtain the latest version of all
device data to verify that any information being relied upon by the customer is current
and accurate.