ICS843021
FEMTOCLOCKS™ CRYSTAL-TO-
3.3V LVPECL CLOCK GENERATOR
Integrated
Circuit
Systems, Inc.
APPLICATION INFORMATION
POWER SUPPLY FILTERING TECHNIQUES
As in any high speed analog circuitry, the power supply pins
are vulnerable to random noise.The ICS843021 provides sepa-
rate power supplies to isolate any high switching
noise from the outputs to the internal PLL.VCC, and VCCA should
be individually connected to the power supply
plane through vias, and bypass capacitors should be
used for each pin. To achieve optimum jitter performance,
power supply isolation is required. Figure 1 illustrates how
a 10Ω resistor along with a 10μF and a .01μF bypass
capacitor should be connected to each VCCA pin.
3.3V
VCC
.01μF
.01μF
10Ω
VCCA
10μF
FIGURE 1. POWER SUPPLY FILTERING
CRYSTAL INPUT INTERFACE
The ICS843021 has been characterized with 18pF parallel resonant crystal and were chosen to minimize the ppm error.
resonant crystals. The capacitor values, C1 and C2, shown in The optimum C1 and C2 values can be slightly adjusted for
Figure 2 below were determined using a 25MHz, 18pF parallel different board layouts.
XTAL_OUT
C1
33p
X1
18pF Parallel Crystal
XTAL_IN
C2
27p
Figure 2. CRYSTAL INPUt INTERFACE
843021AG
www.icst.com/products/hiperclocks.html
REV. C MARCH 31, 2005
6