iC-TW3 SENSOR SIGNAL CONDITIONER WITH
TEMPERATURE COMPENSATION AND LINE DRIVER
Rev B1, Page 2/24
DESCRIPTION
The general purpose sensor signal conditioner iC- For encoder applications an automatic gain and off-
TW3 provides highly accurate non contact trimming set control compensates sensor offset voltages and
of three independent sine/cosine sensor signals. The stabilizes the output signal level.
differential output signals can be calibrated to 1 Vpp
or to 2 Vpp, alternatively.
The direct connection of sine/cosine encoders, MR
sensor bridges or photosensor arrays is possible and
The internal or an external temperature sensor linked supported by a selectable input impedance.
to the chip can influence the gain and offset correc-
tion by arbitrary temperature-dependent compensa-
tion parameters sourced from a look-up table.