iC-PT 2610
6-CH. PHASED ARRAY OPTO ENCODER (26-1000)
Rev B3, Page 10/11
T
GND
CA
T1
pin open
PA
PB
PZ
iC-PTxxxx
T/4
T/4
T/4
T/4
SEL
Figure 8: AB-gated index signal (T1 = open or VCC/2) at x1 interpolation (SEL = low).
T
GND
CA
T1
pin open
PA
PB
PZ
iC-PTxxxx
VCC
T/4 T/4 T/4 T/4
SEL
Figure 9: AB-gated index signal (T1 = open or VCC/2) at x2 interpolation (SEL = high).
APPLICATION NOTES
Application notes for iC-PTxx series ICs are available separately.
DESIGN REVIEW: Notes On Chip Functions
iC-PT2610 Z
No.
Function, Parameter/Code
Description and Application Hints
none at time of printing
Table 4: Chip release iC-PT2610_Z
iC-Haus expressly reserves the right to change its products and/or specifications. An info letter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.de/infoletter; this letter is generated automatically and shall be sent to registered users by
email.
Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.
iC-Haus does not warrant the accuracy, completeness or timeliness of the specification and does not assume liability for any errors or omissions in these
materials.
The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitness
for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which information refers and no
guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of
the product.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
ICHAUS [ IC-HAUS GMBH ]
