iC-OV
5-BIT OPTO ENCODER
Rev C0, 2/9
DESCRIPTION
The device iC-OV is an optoelectronic encoder IC for absolute linear or angle measuring systems, e.g. glass
scales or rotary encoders.
Photodiodes, amplifiers, comparators and TTL-compatible push-pull output drivers for 5 tracks are
monolithically integrated, as well as a reference photodiode to control the LED current. The track pitch is 600
µm.
The outputs switch to high when the amplified photoelectric currents exceed a preset threshold (constant-light
evaluation). The operating point is determined by an external resistor at RSET.
This resistor also establishes the setpoint for the LED current control. The control keeps the optical receive
power constant, irrespective of the temperature or the effects of ageing. The driver stage of the LED current
control makes it possible to connect an LED with series resistor directly.
A monitoring circuit generates a fault message in the event of undervoltage, overtemperature or violation of
the LED current control range. The fault message output is busable (open collector) and low active.
Two test pins permit a complete function test (without photodiodes).
All inputs and outputs are protected against destruction by ESD. The outputs are short-circuit-proof and are
switched off in case of thermal overload.
ICHAUS [ IC-HAUS GMBH ]
