iC-NV
6-BIT Sin/D FLASH CONVERTER
Rev C1, Page 15/19
Wiring photodiode arrays with common anodes
Fig. 22: Wiring scheme with offset adjustment possi-
bility; the resistor values must be selected with
respect to the photo currents available (eg. 65kΩ for
max. 16µA pk at GAIN= 3, or 1µA at GAIN= 50
respectively).
Fig. 23: Additional adjustment possibility for ampli-
tude differences; settings at P3 must be done first.
Wiring magneto-resistor bridge sensors
Fig. 24: Wiring MR sensor bridges with offset adjust-
ment possibility; setup pins remaining open can be
linked to VREF to enhance interference immunity.
Fig. 25: Wiring MR half-bridge sensors with offset
adjustment possibility.
ICHAUS [ IC-HAUS GMBH ]
