iC-HX
3-CHANNEL DIFFERENTIAL COLD LINE DRIVER
Rev A1, Page 3/11
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed. Absolute Maximum Ratings are no Operating Conditions.
Integrated circuits with system interfaces, e.g. via cable accessible pins (I/O pins, line drivers) are per principle endangered by injected
interferences, which may compromise the function or durability. The robustness of the devices has to be verified by the user during system
development with regards to applying standards and ensured where necessary by additional protective circuitry. By the manufacturer
suggested protective circuitry is for information only and given without responsibility and has to be verified within the actual system with
respect to actual interferences.
Item Symbol
No.
Parameter
Conditions
Unit
Min.
Max.
7
G001 VCC
G002 VBx
G003 V()
Supply Voltage
0
0
0
V
V
V
Driver Supply Voltage VB1, VB2, VB3
40
Voltage at E1...6, A1...6, DIFF, ENA,
TNER
40
G004 I(Ax)
G005 I(Ex)
Driver Output Current (x=1...6)
-800
-4
800
4
mA
mA
Input Current Driver E1...E6, Diff, ENA,
TNER
G006 V(NER)
G007 I(NER)
G008 V()
Voltage at NER
0
40
25
V
Current in NER
-4
mA
kV
°C
°C
ESD Suceptibility at all pins
Operating Junction Temperature
Storage Temperature Range
HBM 100 pF discharged through 1.5 k Ω
2
G009 Tj
-40
-40
140
150
G010 Ts
THERMAL DATA
Operating conditions: VB1. . . 3 = 4.5. . . 40 V, VCC = 4.5. . . 5.5 V or VB1. . . 3 = VCC = 4. . . 5.5 V
Item Symbol
No.
Parameter
Conditions
Unit
°C
Min. Typ. Max.
-25 125
T01 Ta
Operating Ambient Temperature Range
(extended range to -40°C on request)
T02 Rthja
Thermal Resistance Chip to Ambient surface mounted, thermal pad soldered to
40
K/W
approx. 2 cm² heat sink
All voltages are referenced to ground unless otherwise stated.
All currents into the device pins are positive; all currents out of the device pins are negative.
ICHAUS [ IC-HAUS GMBH ]
