iC-DXC
DIGITAL SENSOR I/O DRIVER
Rev A0.8, Page 4/11
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed. Absolute Maximum Ratings are no operating conditions!
Integrated circuits with system interfaces, e.g. via cable accessible pins (I/O pins, line drivers) are per principle endangered by injected
interferences, which may compromise the function or durability. The robustness of the devices has to be verified by the user during system
development with regards to applying standards and ensured where necessary by additional protective circuitry. By the manufacturer
suggested protective circuitry is for information only and given without responsibility and has to be verified within the actual system with
respect to actual interferences.
Item Symbol
No.
Parameter
Conditions
Unit
Min.
-36
-36
-36
Max.
G001 VB
Supply Voltage
OUT Voltage
GND Voltage
Referenced to lowest voltage of GND, OUT
Referenced to highest voltage of GND, OUT
36
V
V
G002 OUT
G003 GND
G004 Es()
Referenced to lowest voltage of VB, GND
Referenced to highest voltage of VB, GND
36
36
V
V
Referenced to lowest voltage of VB, OUT
Referenced to highest voltage of VB, OUT
V
V
Maximum Surge Energy as indication Single pulse test between each pins of VB,
6.5
mJ
for external protection design
OUT or GND. Pulse magnitude less than 55 V,
duration less than 100 µs
G005 Vd()
G006 Tj
ESD Susceptibility at all pins
Junction Temperature
HBM, 100 pF discharged through 1.5 kΩ
2
kV
°C
°C
-40
-40
150
150
G007 Ts
Storage Temperature
THERMAL DATA
Operating Conditions: VB = 8..30 V
Item Symbol
No.
Parameter
Conditions
Unit
Min. Typ. Max.
-40 +150
T01 Ta
Operating Ambient Temperature Range no thermal shutdown
°C
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.