3.
Close the display and turn the computer over.
4.
Remove the battery.
5.
Remove the screw that secures the hard disk drive.
6.
Remove the hard disk drive by pulling the cover away from the computer.
7.
Remove the cover of the hard disk drive.
8.
Unpack the new hard disk drive.
Attention
Before you unpack the hard disk drive, be sure to read “Handling
the hard disk drive” on page 1-1.
9.
Attach the cover to the new hard disk drive.
10.
Insert the hard disk drive and its cover into the hard disk drive bay; then
firmly install them. Make sure the label on the hard disk drive is facing
the top of the computer.
11.
Reinstall the screw.
Note:
You can replace the screw with a security screw to prevent the hard
disk drive from being easily removed. The security screw may not
be included in your ship group. However, you can purchase screws
directly from NABS at www.nabsnet.com.
12.
Reinstall the battery.
13.
Connect the ac adapter and cables to the computer.
1-2
ThinkPad Hard Disk Drive: User’s Guide
IBM [ IBM ]
