HYUNDAI MicroElectronics
GMS81C2012/GMS81C2020
GMS81C2012/GMS81C2020
CMOS Single-Chip 8-Bit Microcontroller
with A/D Converter & VFD Driver
1. OVERVIEW
1.1 Description
The GMS81C2012 and GMS81C2020 are advanced CMOS 8-bit microcontroller with 12K/20K bytes of ROM. These are a
powerful microcontroller which provides a highly flexible and cost effective solution to many VFD applications. These pro-
vide the following standard features: 12K/20K bytes of ROM, 448 bytes of RAM, 8-bit timer/counter, 8-bit A/D converter,
10-bit High Speed PWM Output, Programmable Buzzer Driving Port, 8-bit Basic Interval Timer, 7-bit Watch dog Timer,
Serial Peripheral Interface, on-chip oscillator and clock circuitry. They also come with high voltage I/O pins that can directly
drive a VFD (Vacuum Fluorescent Display). In addition, the GMS81C2012 and GMS81C2020 support power saving modes
to reduce power consumption.
Device name
GMS81C2012
GMS81C2020
ROM Size
12K bytes
20K bytes
RAM Size
OTP
Package
-
64SDIP,64MQFP,
64LQFP
448 bytes
GMS87C2020
1.2 Features
• 20K/12K bytes ROM(EPROM)
• 12-Channel 8-bit On-Chip Analog to Digital
Converter
• 448 Bytes of On-Chip Data RAM
(Including STACK Area)
• Oscillator:
- Crystal
- Ceramic Resonator
- External R Oscillator
• Minimum Instruction Execution time:
- 1uS at 4MHz (2cycle NOP Instruction)
• One 8-bit Basic Interval Timer
• One 7-bit Watch Dog Timer
• Low Power Dissipation Modes
- STOP mode
- Wake-up Timer Mode
- Standby Mode
- Watch Mode
• Two 8-bit Timer/Counters
• 10-bit High Speed PWM Output
• One 8-bit Serial Peripheral Interface
• Two External Interrupt Ports
- Sub-active Mode
• Operating Voltage: 2.7V ~ 5.5V (at 4.5MHz)
• Operating Frequency: 1MHz ~ 4.5MHz
• Sub-clock: 32.768KHz Crystal Oscillator
• One Programmable 6-bit Buzzer Driving Port
• 60 I/O Lines
- 56 Programmable I/O pins
(Included 30 high-voltage pins Max. 40V)
- Three Input Only pins: 1 high-voltage pin
- One Output Only pin
• Enhanced EMS Improvement
Power Fail Processor
(Noise Immunity Circuit)
• Eight Interrupt Sources
- Two External Sources (INT0, INT1)
- Two Timer/Counter Sources (Timer0, Timer1)
- Four Functional Sources (SPI,ADC,WDT,BIT)
MAR. 2000 Ver 1.00
5