Chapter 7. GMS36XXXT
Pin Description
Pin
I/O
Function
VDD
-
Connected to 2.2~ 3.6V power supply
GND
-
Connected to 0V power supply.
4-bit input port with built in pull-up resistor.
STOP mode is released by "L" input of each pin.
Especially, K3 is the input pin for VPP.
Input
K0 ~ K3
For programming K3 pin receives 12.5V(programming voltage).
Each can be set and reset independently.
D0 ~ D9
R0 ~ R3
Output
I/O
The output is the structure of N-channel-open-drain.
4-bit I/O port. (Input mode is set only when each of them output
"H".)
In outputting, each can be set and reset independently(or at once.)
The output is in the form of C-MOS.
STOP mode is released by "L" input of each pin.
Oscillator input. Input to the oscillator circuit and connection point for
ceramic resonator.
OSC1
Input
Internal capacitors available at kHz version.
A feedback resistor is internally connected between this pin and
OSC2.
Connect a resonator between this pin and OSC1.
OSC2
Output
Output
High current output port driving I.R. LED.
REMOUT
The output is in the form of N-channel-open-drain.
High current Tr. ground pin. (connected to GND)
PGND
-
High current output Tr. is connected between this pin and
REMOUT.
7-2
HYNIX [ HYNIX SEMICONDUCTOR ]
