Chapter 5. Software
EPP (Exchange Program memory)
[Function]
To display and modify the specified program memory.
[Format]
EPP_<Address>
[Explanation]
With this, the system displays and modifies the specified program memory. This
mode is continuous and each time ` ` is pressed, the succeeding address shall
be displayed, setting operation shall be performed continuously until `.` is
pressed. When `_` is pressed, the system goes back to the address immediately
before. The address used with this command is polynomial. It is possible to use
symbols in <address>.
[e.g]
>EPP_100
100
101
103
>
:
:
:
0D>37
77>AF
42> .
EPS (Exchange Program memory)
[Function]
To display and modify the specified data memory.
[Format]
EPS_<Address>
[Explanation]
With this, the system displays and modifies the specified program memory. This
Mode is continuous and each time ` ` is pressed, the succeeding address shall
be displayed and setting operation shall be performed continuously until `.` is
pressed. When `_` is pressed, the system goes back to the address immediately
before. The address used with this command is sequential.
It is possible to use symbols in <address>.
[e.g]
>EPS_100
100
101
102
>
:
:
:
48>6
04>45
53>.
5 - 26
HYNIX [ HYNIX SEMICONDUCTOR ]
