Chapter 5. Software
11) EPS (Exchange Program memory)
To display and modify the specified data in the program memory.
12) ED (Exchange Data memory)
To display or modify data in the specified data memory.
13) FPP (Fill Program memory)
To fill the area of the program memory specified with <In> from the specified
<address> with the specified byte data. The address here is polynomial.
14) FPS (Fill Program memory)
To fill the area of the program memory specified with <In> from the specified
<address> with the specified byte data.
15) FD (Fill Data memory)
To fill the area of the data memory specified with <In> from the specified
<address> with the specified nibble data.
16) G (Go)
To execute the program in the specified program memory.
17) H (Hex calculate)
To add or subtract in hexadecimal.
18) LOGON (LOGIN)
To log the commands executed after this command.
19) LOGOFF (LOGOUT)
To end logging.
20) LP (Load Program from MS-DOS* file)
To load `files` on MS-DOS* to the memory.
21) MPP ( Move Program memory)
To transfer data in the memory area to another area.
The address here is polynomial.
5 - 16
HYNIX [ HYNIX SEMICONDUCTOR ]
