The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
BPackaging Specifications
●Embossed carrier tape dimensions
●Reel Dimensions
Unreeling direction
12
0.5
C
D
4
2
Unreeling direction
1.8
Part Number
ZX62-B-5PA
ZX62-AB-5PA
ZX62M-B-5P
Other
C dimension
30.4
D dimension
24.4
24.4
24.4
16.4
Part Number
ZX62-B-5PA
ZX62-AB-5PA
ZX62M-B-5P
Other
A dimension
B dimension
11.5
30.4
24
24
24
16
30.4
11.5
22.4
11.5
Note : Tape and reel packaging (2,000 pieces/reel).
Order by number of reels.
7.5
BRecommended Temperature Profile - Receptacles
●Using lead-free solder paste
HRS test condition
Solder composition :Paste,96.5%Sn/3.0%Ag/0.5%Cu
(ç)
250
200
150
100
50
Test board :Glass epoxy 35mm∞35mm∞0.8mm thick
250ç
The temperature profile is based on the left conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and
board size/thickness. Contact your solder paste and
equipment manufacturer for specific recommendations.
220çmin.
180ç
150ç
Note 1: Up to 2 cycles of Reflow soldering are possible
under the same conditions, provided that there is a
return to normal temperature between the first and
second cycle.
120 S
70 S
Note 2: The temperature profile indicates the board surface
temperature at the point of contacts with the
connector terminals.
(S)
BPrecautions
1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating.
2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable.
3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected.
4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 07/2008. Contents are subject to change without notice for the purpose of improvements.
20
HRS [ HRS ]
