B
Soldering Temperature Profile
1. Recommended temperature profile
(Note 1) The temperature profile can be applied twice with the normal temperature profile.
(Note 2) The temperature is measured at the connector lead.
Soldering iron temperature 290 ±10ç, soldering time 3 seconds or less
0.15mm
2. Recommended manual soldering conditions
3. Recommended screen thickness
4. Warpage of board
5. Cleaning
Max. 0.03mm at the connector center with the connector ends as the reference.
See the separate “Guide to Hirose Nylon connectors.”
See the separate “Guide to Hirose Nylon connectors.”
6. Wiring
■
As crimp terminals are extremely small, crimping must be performed with care: observe
the directions in the Crimping Condition Sheet and Crimping Standard Sheet.
“
”
“
”
7. Precautions
■ Due to the ultra miniature design care needs to be taken when disconnecting to avoid
accidental damage.
11
HRS [ HRS ]
