BPrecautions
1. Recommended Temperature
Profile (SMT)
Note 1.This process is allowed up to twice under the same condition.
However, the interval between the first and second processes must be maintained at
the room temperature.
Note 2.The temperature indicates the board surface temperature in the connector lead area.
2. Recommended Soldering
Condition (SMT)
Manual soldering: 290ç for 2 seconds
3. Recommended Screen
Thickness (SMT)
0.15 to 0.2mm
4. Board Warpage (SMT)
5. Recommended Soldering
5. Condition (Through hole)
6. Cleaning Condition
7. Connection Condition
Max 0.03mm in the connector center area, based on both connector edges
Flow: 250ç for 3 seconds
Manual soldering: 290ç for 2 seconds
Refer to Nylon Connector Use Hand book.
Refer to Nylon Connector Use Hand book.
■Carefully carry out the crimping operation according to "Crimping Condition Sheet" and
"Crimping Quality Standard", because the crimping contact is an extremely small style.
■Be careful for the excessive scoop insertion/extraction, which will cause damage to the
product.
8. Cautions
B193