BApplication Pattern
BPrecautions
(
)
1. Recommended Temperature Profile SMT
Note1: Maximum twice action is allowed under the same condition. However, the interval between
first and second actions must be maintained at the room temperature.
Note2: The temperature indicates the board surface temperature in the connector lead area.
(
)
2. Recommended Manual Soldering Condition SMT Soldering iron temperature: 290 10ç, Soldering time: Within 2 seconds
(
)
3. Recommended Screen Thickness SMT 0.15 to 0.2mm
(
)
4. Board Warp age SMT
Based on the both connector edges, 0.03mm max. is allowed in the connector center area.
Flow: 250ç for 3 seconds
(Through hole)
5. Recommended Soldering Condition
Manual soldering: 290ç for 2 seconds
6. Cleaning Condition
Refer to the "Nylon Connector Use Hand book".
Refer to the "Nylon Connector Use Hand book".
7. Connection Condition
A277