The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF19 Series●1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
■Plug (Micro-coaxial cable)
C
D
0.ꢀ
0.15
A
B
P=1 0.1
Inner conductor
P=1
Contact No. 1 indicator
Insulator
Grounding bar
0.55-00.05
Outer conductor
1.33
Jacket
Cable preparation
Note 1: Connectors are designed to allow termination without cutting
of the pitch loss prevention tape.
Shown terminated with micro-coaxial cable
Note ꢀ: Required Solder coating for inner conductor.
Note 3: When using ꢀ-conductor micro-coaxial cable some contact
positions will not be used.
Contact your Hirose sales representative.
Part number
CL No.
Number of contacts
A
B
C
RoHS
YES
D
Specification
(05): Bag packaging
DF19G-14S-1SD(05) 685-00ꢀ6-3-05
DF19G-ꢀ0S-1SD(05) 685-00ꢀ5-0-05
14
ꢀ0
17.4
ꢀ3.4
13
19
14.8
ꢀ0.8
13
19
(100 pieces per bag)
Note: Order by number of bags.
●Applicable cable (Micro-coaxial cable)
Wire size (stranded wire center conductor)
Jacket diameter
0.3mm to 0.4mm
AWG#40 (7/ 0.03mm)
■Grounding plate for micro-coaxial cable
Contact No. 1 indicator
A
Specification
Blank: Bag packaging
(100 pieces per bag)
Unit: mm
Part number
CL No.
Number of contacts
RoHS
A
685-00ꢀ8-9
685-00ꢀ7-6
14
ꢀ0
17.5
ꢀ3.5
DF19F-14S-1SD-GND
DF19G-ꢀ0S-1SD-GND
YES
B262
HRS [ HRS ]
