Signal Integrity Report – IT3 (32mm)
3.1.1.2 60% density pin assignment
Page 10
Figure 13 shows the corresponding SDD for pair 4 for 60% pin density configuration. The SDD
results are summarized in Table 3. Figure 14 - Figure 15 and Figure 16 - Figure 17 show the power
sum and ICR profile comparison with the IEEE 802.3ap spec for NEXT and FEXT, respectively.
Figure 12 60% density pin assignment
Figure 13 SDD for pair 4 (ports 7-8) of connector only for 60% pin density configuration
FREQUENCY
(GHZ)
INSERTION LOSS
(DB)
RETURN LOSS
(DB)
WORST PAIR-TO-PAIR
NEXT (DB)
WORST PAIR-TO-PAIR
FEXT (DB)
1.25
1.5625
2.5
-0.170
-0.200
-0.3020
-0.364
-36.86
-31.65
-23.80
-23.34
-71.99
-70.76
-53.87
-51.51
-60.40
-57.66
-51.48
-50.73
3.125
5
-0.539
-19.46
-48.32
-45.14
6.25
10
-0.724
-1.062
-16.16
-15.01
-43.15
-43.22
-44.45
-41.20
Table 3 Summary of SDD for pair 4 (ports 7-8) of connector only for 60% pin density configuration