1
Test port output power
Table 12. Option 230/235/240/245/260/265/280/285/430/435/440/
445/460/465/480/485
Description
Specification
Typical
Nominal power
(preset power)
0 dBm
Level accuracy2, 6
(stepped sweep mode)
0.650 dB (at 0 dBm,
50 MHz absolute)
1.0 dB
Level accuracy2
(swept sweep mode)
2.5 dB
Level linearity3, 5, 6
(stepped sweep mode)
9 kHz to 5 GHz
0.75 dB (–20 to 10 dBm)
0.75 dB (–20 to 9 dBm )
0.75 dB (–20 to 8 dBm )
0.75 dB (–20 to 7 dBm )
5 GHz to 6 GHz
6 GHz to 7 GHz
7 GHz to 8.5 GHz
Level linearity5
(swept sweep mode)4
9 kHz to 5 GHz
1.5 dB (at –20 to 10 dBm)
1.5 dB (at –20 to 9 dBm)
1.5 dB (at –20 to 8 dBm)
1.5 dB (at –20 to 7 dBm)
5 GHz to 6 GHz
6 GHz to 7 GHz
7 GHz to 8.5 GHz
Range5, 6
–55 to 10 dBm
–55 to 9 dBm
–55 to 8 dBm
–55 to 7 dBm
9 kHz to 5 GHz
5 GHz to 6 GHz
6 GHz to 7 GHz
7 GHz to 8.5 GHz
Sweep range5, 6
9 kHz to 5 GHz
5 GHz to 6 GHz
6 GHz to 7 GHz
7 GHz to 8.5 GHz
–55 to 10 dBm
–55 to 9 dBm
–55 to 8 dBm
–55 to 7 dBm
Level resolution
0.05 dB
Description
Specification
SPD
Max leveled power5, 6
(Option 230/235/240/245/260/
265/280/285)
9 kHz to 8.5 GHz
10 dBm
(Option 430/435/440/445/460/
465/480/485)
9 kHz to 6 GHz
10 dBm
9 dBm
8 dBm
6 GHz to 7 GHz
7 GHz to 8.5 GHz
1. Source output performance on port 1 only. Other port output performance is typical.
2. Level accuracy is taken at 0 dBm, relative to 50 MHz reference unless otherwise stated.
3. Level linearity given is relative to 0 dBm.
4. The specification might not be met at 5 MHz or 50 MHz.
5. The level accuracy specification needs to be taken into account for test port output power level.
6. Power calibration using an external power meter improves level accuracy of the test port output power.
Proper power meters/sensors, and the 82357B USB-GPIB interface are required to conduct power calibration.
15
HP [ HEWLETT-PACKARD ]
