Table 28. Rear panel information (continued)
Description
Typical
General characteristics
1
USB (USBTMC )
interface port
Universal serial bus jack,
Type B configuration
(4 contacts inline); female;
provides connection to an
external PC; compatible
with USBTMC-USB488 and
USB 2.0.
LAN
10/100BaseT Ethernet, 8-pin
configuration; auto selects
between the two data rates
Handler I/O port
36-pin centronics, female;
provides connection to
handler system
Line power2
Frequency
ꢀoltage
47 Hz to 63 Hz
90 to 132 ꢀAC, or 198 to
264 ꢀAC (automatically
switched)
ꢀA max
350 ꢀA max.
Description
AUX input connector
Type
Specification
General characteristics
BNC, female x 2
Input range
Accuracy
1 ꢀ or 10 ꢀ selectable
1 % + 1 mꢀ for 1 ꢀ input
1 % + 10 mꢀ for 10 ꢀ input
Table 29. LXI compliance
Description
General characteristics
Class C (only applies to units that are shipped with
firmware revision A.08.00 or later)
1. USB Test and Measurement Class (TMC) interface that communicates over USB, complying with
the IEEE 488.1 and IEEE 488.2 standards.
2. A third-wire ground is required.
30