RFM22B/23B
Table 8. Absolute Maximum Ratings
Parameter
Value
Unit
V
to GND
–0.3, +3.6
–0.3, +8.0
–0.3, +6.5
V
V
DD
Instantaneous V
to GND on TX Output Pin
RF-peak
Sustained V
to GND on TX Output Pin
V
RF-peak
Voltage on Digital Control Inputs
–0.3, V + 0.3
V
DD
Voltage on Analog Inputs
–0.3, V + 0.3
V
DD
RX Input Power
+10
–40 to +85
–20 to +60
30
dBm
C
C
C/W
Operating Temperature Range (special crystal is used on the module) T
Operating Temperature Range (Normal crystal is used on the module) T
S
N
Thermal Impedance
JA
Storage Temperature Range T
–55 to +125
C
STG
Note: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These
are stress ratings only and functional operation of the device at or beyond these ratings in the operational sections of
the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability. Power Amplifier may be damaged if switched on without proper load or termination connected. TX
matching network design will influence TX VRF-peak on TX output pin. Caution: ESD sensitive device.
Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com
10
HOPERF [ HOPERF ]
