欢迎访问ic37.com |
会员登录 免费注册
发布采购

RF31 参数 Datasheet PDF下载

RF31图片预览
型号: RF31
PDF下载: 下载PDF文件 查看货源
内容描述: ISM接收器 [ISM Receiver]
分类和应用: ISM频段
文件页数/大小: 139 页 / 3458 K
品牌: HOPERF [ HOPERF ]
 浏览型号RF31的Datasheet PDF文件第32页浏览型号RF31的Datasheet PDF文件第33页浏览型号RF31的Datasheet PDF文件第34页浏览型号RF31的Datasheet PDF文件第35页浏览型号RF31的Datasheet PDF文件第37页浏览型号RF31的Datasheet PDF文件第38页浏览型号RF31的Datasheet PDF文件第39页浏览型号RF31的Datasheet PDF文件第40页  
RF31  
Table 14. Minimum Receiver Settling Time  
Approximate  
Recommended preamble  
length with 8-bit  
detection threshold  
20 bits  
Recommended preamble  
length with 20-bit  
detection threshold  
32 bits  
Mode  
receiver settling time  
(G)FSK AFC Disabled  
(G)FSK AFC Enabled  
(G)FSK AFC Disabled +Antenna  
Diversity Enabled  
1 byte  
2 byte  
28bits  
40 bits  
1 byte  
64 bits  
(G)FSK AFC Enabled +Antenna  
Diversity Enabled  
2 byte  
2 byte  
8 byte  
3 byte  
8 byte  
4 byte  
8 byte  
OOK  
OOK + Antenna Diversity  
Enabled  
Note: The recommended preamble length and the preamble detection threshold may be shortened when occasional packet  
errors are tolerable.  
6.7. Invalid Preamble Detector  
When scanning channels in a Frequency Hopping System, it is desirable to determine if a channel is valid in the  
minimum amount of time. The preamble detector can output an invalid preamble detect signal. When an error is  
detected in the preamble, the Invalid Preamble Detect signal (nPQD) is asserted, indicating an invalid channel. The  
signal can be used to qualify the channel without requiring the full preamble to be received. The Preamble Detect  
and Invalid Preamble Detect signals are available in "Register 03h. Interrupt/Status 1" and ―Register 04h.  
Interrupt/Status 2,‖.  
The Invalid Preamble Detector issues an interrupt when no valid preamble signal is found. After the receiver is  
enabled, the Invalid Preamble Detector will be held low for 16 Tb (Tb is the time of the bit duration) to allow the  
receiver to settle. The 16 Tb is a fixed time which will work with a 4-byte Preamble (or longer) when AFC is  
enabled, or a 3-byte preamble (or longer) when AFC is disabled. The invalid preamble detect interrupt can be  
useful to save power and speed-up search in receive mode.  
It is advised to disable the invalid preamble interrupt when Antenna Diversity is enabled. The Invalid Preamble  
Detect interrupt may be triggered during the Antenna Diversity algorithm if one of the antennas is weak but the  
other is capable of still receiving the signal if the Antenna Diversity algorithm is allowed to complete.  
36  
Tel: +86-755-82973805  
Fax: +86-755-82973550  
E-mail: sales@hoperf.com  
http://www.hoperf.com  
 复制成功!