Microstructure Pressure Sensors
Signal Conditioned
0 psi to 1 psi up to 0 psi to 150 psi
ASCX Series
ASCX PERFORMANCE CHARACTERISTICS (4)
Characteristic
Min.
Typ.
Max.
Unit
Offset (5)
Models ASCX15/30/100/150xN
Models ASCX01/05DN
Output @ FS Pressure
0.205 0.250
0.180 0.250
4.750
0.295 Volts
0.320 Volts
Volts
Combined Pressure Linearity and Hysteresis (6)
Temperature Effect on Span 0 °C to 70 °C [32 °F to 158 °F](7)
Models ASCX15/30/100/150xN
Models ASCX01/05DN
–
0.1
0.5
% FSO
–
–
0.2
0.2
1.0
1.5
% FSO
% FSO
Temperature Effect on Offset 0 °C to 70 °C [32 °F to 158 °F](7)
Models ASCX15/30/100/150xN
Models ASCX01/05DN
–
0.5
0.5
0.2
1.0
1.5
0.5
–
% FSO
% FSO
% FSO
Microsec.
Repeatability (8)
–
–
Response Time (9)
100
SPECIFICATION NOTES
Note 1:
Note 2:
Note 3:
Note 4:
Full-Scale Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure.
Maximum pressure above which causes permanent sensor failure.
Sensitivity is ratiometric to supply voltage.
Performance specs are shown at reference conditions. Specifications apply for absolute pressure devices with pressure applied
to Port A. For gage devices, pressure is applied to Port B and Port A is left open for ambient. For differential pressures, Port B
is the high-pressure port. All differential devices feature dual pressure ports and can be used as gage or differential sensors.
For absolute devices, Port B is inactive.
Note 5:
Note 6:
Note 7:
Note 8:
Offset calibration is at the lowest pressure for each given device.
Linearity refers to the best straight line fit as measured for offset, full scale and ½ full-scale pressure.
Temperature errors are the maximum shift over 0 °C to 70 °C [32 °F to 158 °F], relative to the 25 °C [77 °F] reading.
Maximum difference in output at any pressure within the operating pressure range and the temperature within 0 °C to 70 °C
[32 °F to 158 °F] after:
a) 100 temperature cycles, 0 °C to 70 °C [32 °F to 158 °F]
b) 1.0 million pressure cycles, 0 psi to Full-Scale Span.
Note 9:
Response time for a 0 psi to Full-Scale Span pressure step change, 10 % to 90 % rise time.
ELECTRICAL CONNECTION
Pinout
ASCX Series
PIN 1) External Offset Adjustment
PIN 2) Vs
PIN 3) + Output
PIN 4) Ground
PIN 5) N/C
PIN 6) Do Not Use
Honeywell • Sensing and Control 3