Manual Switches
Pushbutton Switches and Indicators
SWITCH GUARD ACCESSORY
A hinged cover on the switch guard helps
avoid inadvertent operation of the display
screen. It is installed in place of the trans-
parent slide-on cap furnished with three-
piece screen. Note: When used with pull-
in coil devices, specify the 2C200 oper-
ator-indicator housings which have the
no-tool relamping feature.
Series 2
Key:
0,0
=
mm
0.00
=
inches
Barrier mount assembly with guard in-
stalled. (Can also be used with all flange
mount units.)
Guard requires a ‘‘lift-to-push’’ response
to operate switch normally.
Order Catalog Listing
2H20
112
Honeywell Sensing and Control 1-800-537-6945 USA
1-815-235-6847 International 1-800-737-3360 Canada