HT46R232
A/D Type 8-Bit OTP MCU
Technical Document
·
·
·
-
-
-
Features
·
Operating voltage:
·
Up to 0.5ms instruction cycle with 8MHz system clock
f
SYS
=4MHz: 2.2V~5.5V
f
SYS
=8MHz: 3.3V~5.5V
·
40 bidirectional I/O lines (max.)
·
1 interrupt input shared with an I/O line
·
Two 16-bit programmable timer/event counter with
at V
DD
=5V
·
8-level subroutine nesting
·
8 channels 10-bit resolution A/D converter
·
4-channel 8-bit PWM output shared with
four I/O lines
·
Bit manipulation instruction
·
16-bit table read instruction
·
63 powerful instructions
·
All instructions in one or two machine cycles
·
Low voltage reset function
·
I
2
C Bus (slave mode)
·
28-pin SKDIP/SOP, 48-pin SSOP packages
overflow interrupt
·
On-chip crystal and RC oscillator
·
Watchdog Timer
·
4096´16 program memory
·
192´8 data memory RAM
·
Supports PFD for sound generation
·
HALT function and wake-up feature reduce power
consumption
General Description
The HT46R232 are 8-bit, high performance, RISC ar-
chitecture microcontroller devices specifically designed
for A/D applications that interface directly to analog sig-
nals, such as those from sensors.
The advantages of low power consumption, I/O flexibil-
ity, programmable frequency divider, timer functions,
oscillator options, multi-channel A/D Converter, Pulse
Width Modulation function, I
2
C interface, HALT and
wake-up functions, enhance the versatility of these de-
vices to suit a wide range of A/D application possibilities
such as sensor signal processing, motor driving, indus-
trial control, consumer products, subsystem controllers,
etc.
I
2
C is a trademark of Philips Semiconductors.
Rev. 1.20
1
July 13, 2005
HOLTEK [ HOLTEK SEMICONDUCTOR INC ]
