HT46R22/HT46C22
A/D Type 8-Bit MCU
Technical Document
·
Tools Information
·
FAQs
·
Application Note
-
-
-
HA0013E HT48 & HT46 LCM Interface Design
-
HA0047E An PWM application example using the HT46 series of MCUs
Features
·
Operating voltage:
·
Up to 0.5ms instruction cycle with 8MHz system clock
f
SYS
=4MHz: 2.2V~5.5V
f
SYS
=8MHz: 3.3V~5.5V
·
19 bidirectional I/O lines (max.)
·
1 interrupt input shared with an I/O line
·
8-bit programmable timer/event counter with
at V
DD
=5V
·
6-level subroutine nesting
·
8 channels 9-bit resolution A/D converter
·
1-channel 8-bit PWM output shared with one I/O line
·
Bit manipulation instruction
·
14-bit table read instruction
·
63 powerful instructions
·
All instructions in one or two machine cycles
·
Low voltage reset function
·
I
2
C Bus (slave mode)
·
24-pin SKDIP/SOP package
overflow interrupt and 7-stage prescaler
·
On-chip crystal and RC oscillator
·
Watchdog Timer
·
2048´14 program memory
·
64´8 data memory RAM
·
Supports PFD for sound generation
·
HALT function and wake-up feature reduce power
consumption
General Description
The HT46R22/HT46C22 are 8-bit, high performance,
RISC architecture microcontroller devices specifically
designed for A/D applications that interface directly to
analog signals, such as those from sensors. The mask
version HT46C22 is fully pin and functionally compatible
with the OTP version HT46R22 device.
The advantages of low power consumption, I/O flexibil-
ity, programmable frequency divider, timer functions,
oscillator options, multi-channel A/D Converter, Pulse
Width Modulation function, I
2
C interface, HALT and
wake-up functions, enhance the versatility of these de-
vices to suit a wide range of A/D application possibilities
such as sensor signal processing, motor driving, indus-
trial control, consumer products, subsystem controllers,
etc.
I C is a trademark of Philips Semiconductors
2
Rev. 2.11
1
January 21, 2009
HOLTEK [ HOLTEK SEMICONDUCTOR INC ]
