HMC232G7
v02.1006
GaAs MMIC SMT HIGH ISOLATION
SPDT SWITCH, DC - 6 GHz
Evaluation PCB
10
List of Materials for Evaluation PBC 107181 [1]
The circuit board used in the final application should
be generated with proper RF circuit design tech-
niques. Signal lines at the RF port should have 50
ohm impedance and the package ground leads and
package bottom should be connected directly to the
ground plane similar to that shown above. The eval-
uation circuit board shown above is available from
Hittite Microwave Corporation upon request.
Item
Description
J1 - J3
J4 - J6
R1, R2
U1
PCB Mount SMA RF Connector
DC Pin
100 Ohm Resistor, 0603 Pkg.
HMC232G7 SPDT Switch
107099 Evaluation PCB
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 76
HITTITE [ HITTITE MICROWAVE CORPORATION ]
