HMC1190LP6GE
v01.1112
BROADBAND HIGH IP3 DUAL CHANNEL DOWNCONVERTER
w/ Fractional-N PLL & VCO, 0.7 - 3.5 GHz
PLL & VCO Specifications (Continued)
Parameter
Conditions
Min.
Typ.
Max.
Units
VCO Open Loop Phase Noise at fo @ 3 GHz/2 = 1.5 GHz
10 kHz Offset
100 kHz Offset
1 MHz Offset
-83
-113
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-139.5
-165.5
-167
10 MHz Offset
100 MHz Offset
Figure of Merit
Floor Integer Mode
Floor Fractional Mode
Flicker (Both Modes)
VCO Characteristics
Normalized to 1 Hz
Normalized to 1 Hz
Normalized to 1 Hz
-230
-227
-268
dBc/Hz
dBc/Hz
dBc/Hz
VCO Tuning Sensitivity at
3862 MHz
Measured at 2.5 V
Measured at 2.5 V
Measured at 2.5 V
Measured at 2.5 V
Measured at 2.5 V
15
MHz/V
MHz/V
MHz/V
MHz/V
VCO Tuning Sensitivity at
3643 MHz
14.5
16.2
14.6
15.4
VCO Tuning Sensitivity at
3491 MHz
VCO Tuning Sensitivity at
3044 MHz
VCO Tuning Sensitivity at
2558 MHz
VCO Tuning Sensitivity at
2129 MHz
Measured at 2.5 V
Measured at 2.5 V
14.8
2
VCO Supply Pushing
MHz/V
Enable/Disable Settling Time Specifications
Parameter
Enable Settling Time
Disable Settling Time
Conditions
Min.
Typ.
140
110
Max.
Units
ns
Mixer Core Enabled
Mixer Core Disabled
ns
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
5
HITTITE [ HITTITE MICROWAVE CORPORATION ]
