HMC1055LP2CE
V00.0912
GaAs MMIC SPST
FAILSAFE SWITCH, DC - 4 GHz
Features
Failsafe Operation - “On” When Unpowered
Wide Vdd Range: 1.2V to 5V
Very Low On State Current: 200 nA
Low Insertion Loss: 0.7 dB
High IP3: +52 dBm
Compact SOT26 SMT Package
Typical Applications
The HMC1055LP2CE is ideal for:
• RFID & Electronic Toll Collection (ETC)
• Tags, Handsets & Portables
• ISM, WLAN, WiMAX & WiBro
• Automotive Telematics
• Test Equipment
Functional Diagram
General Description
The HMC1055LP2CE is low-cost SPST Failsafe
switch in 2x2mm,8 lead DFN plastic package for
use in switching application which require low
insertion loss and very low current consumption.
With 0.7 dB typical loss, these devices can control
signals from DC to 4 GHz and are especially suited
for IF and RF applications including RFID, ISM,
automotive and battery powered tags and portables.
RF1 and is reflective open while RF2 is terminated in
50 OHMs when “Off”. The switch requires a minimal
amount of DC current in the “On” state, and offers
compatibility with CMOS and some TTL logic families.
The failsafe topology results in the switch being
normally “On”, i.e. low insertion loss from RF1 to RF2,
when no DC bias is applied.
SwitcheS - SPSt - SMt
Electrical Specifications
Parameter
Insertion Loss
Isolation
Return Loss
Input Power for 0.1 dB Compression
T
A
= +25° C, Vdd = +3.3 Vdc, Vctl = 0/+3.3 Vdc
(Unless Otherwise Stated)
, 50 Ohm System
Frequency
DC - 3.0 GHz
DC- 4.0 GHz
DC - 2.0 GHz
DC - 4.0 GHz
DC - 4.0 GHz
Vctl = 0/+3.3V
Vctl = 0/+3.3V
0.5 - 4.0 GHz
0.5 - 4.0 GHz
DC - 4.0 GHz
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
40
50
ns
ns
Min.
Typ.
0.6
1.8
36
28
25
28
63
Max.
Units
dB
dB
dB
dB
dBm
dBm
Input Third Order Intercept
(Two-tone Input Power = +15 dBm Each Tone)
Switching Characteristics
1
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com