HMC758LP3 / 758LP3E
v00.1108
GaAs SMT pHEMT LOW NOISE
AMPLIFIER, 700 - 2200 MHz
Pin Descriptions
pin Number
1, 3 - 6,
7 - 10, 12, 14
function
N/C
Description
No connection required. These pins may be connected
to rf/DC ground without affecting performance.
interface schematic
7
This pin is DC coupled. An off-chip DC
blocking capacitor is required.
2
rfiN
11
rfoUT
This pin is DC coupled. An off-chip DC
blocking capacitor is required.
13
BiAs2
This pin is used to set the DC current of the second stage
amplifier by selection of external bias resistor. see
application circuit.
15
Vdd
power supply Voltage for the amplifier. Bypass capacitors are
required. see application circuit.
16
BiAs1
This pin is used to set the DC current of the first
stage amplifier by selection of external bias resistor.
see application circuit.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
7-6
Amplifiers - low Noise - smT