HMC605LP3 / 605LP3E
v03.0809
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER w/ BYPASS MODE, 2.3 - 2.7 GHz
8
LOW NOISE AMPLIFIERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 117160
[1]
Item
J1 - J2
J3 - J6
C1, C2
C3
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
10 KpF Capacitor, 0402 Pkg.
HMC605LP3 / HMC605LP3E Amplifier
117158 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
8 - 236
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com