HMC474MP86
/
474MP86E
v01.0906
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 6 GHz
Evaluation PCB
9
DRIVER & GAIN BLOCK AMPLIFIERS - SMT
9 - 65
List of Materials for Evaluation PCB 107179
[1]
Item
J1 - J2
J3 - J4
C1, C2
C3
C4
C5
R1
L1
U1
PCB
[2]
Description
PCB Mount SMA Connector
DC Pin
Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
Resistor, 1210 Pkg.
Inductor, 0603 Pkg.
HMC474MP86 / HMC474MP86E
107087 Evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads should be connected directly to the
ground plane similar to that shown. A sufficient
number of via holes should be used to connect
the top and bottom ground planes. The evaluation
board should be mounted to an appropriate heat
sink. The evaluation circuit board shown is available
from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
