HMC446
/
446E
v03.0805
GaAs MMIC 10W T/R
SWITCH, 824 - 894 MHz*
Evaluation PCB
8
SWITCHES - SMT
List of Materials for Evaluation PCB 103837
[1]
Item
J1 - J3
J4 - J6
C1 - C3
LTx
LRx
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
DC Pin
330 pF Capacitor, 0603 Pkg.
22 nH Inductor, 0603 Pkg.
8.2 nH Inductor, 0402 Pkg.
HMC446 / HMC446E T/R Switch
103835 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the pack-
age ground leads should be connected directly to
the ground plane similar to that shown above. A
sufficient number of VIA holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board as shown is available from
Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 261
HITTITE [ HITTITE MICROWAVE CORPORATION ]
