HMC441LP3 / 441LP3E
v04.0508
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 6.5 - 13.5 GHz
Evaluation PCB
11
LINEAR & POWER AMPLIFIERS - SMT
11 - 99
List of Materials for Evaluation PCB 106705
[1]
Item
J1 - J2
J3 - J7
C1
C2 - C4
U1
PCB
[2]
Description
PCB Mount SMA Connector
DC Pin
4.7 μF Capacitor, Tantalum
100 pF Capacitor, 0402 Pkg.
HMC441LP3 / HMC441LP3E Amplifier
106639 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
