HMC434
/
434E
v02.0705
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 8.0 GHz
5
FREQUENCY DIVIDERS & DETECTORS - SMT
Evaluation PCB
Note: Line lengths on pins 1 & 4
(N/C) are not necessary.
List of Materials for Evaluation PCB 105675
[1]
Item
J1 - J2
J3 - J4
C1 - C2
C3
C4
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0402 Pkg.
10 μF Tantalum Capacitor, 1206 Pkg.
HMC434 / HMC434E Divide-by-8
105199 Eval Board
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
5 - 82
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
