HMC399MS8 / 399MS8E
v03.0705
HIGH IP3 GaAs MMIC
MIXER, 700 - 1000 MHz
Evaluation PCB
7
MIXERS - SMT
List of Materials for Evaluation PCB 106334
[1]
Item
J1 - J3
L1
[3]
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
24 nH Chip Inductor, 0805 Pkg
HMC399MS8 / HMC399MS8E Mixer
106307 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[3] Unless otherwise noted, all measurements performed as a
downconverter with low side LO & IF = 200 MHz
[4] LO Frequency optimized. See application circuit herein.
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
VIA holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
7 - 270
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
