HMC363S8G
/
363S8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 12.0 GHz
5
FREQUENCY DIVIDERS & DETECTORS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 104631
Item
J1 - J3
C1 - C4
C5
C6
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
10 μF Tantalum Capacitor
HMC363S8G / HMC363S8GE Divide-by-8
104627 Eval Board
[1]
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and backside ground slug
should be connected directly to the ground plane
similar to that shown. A sufficient number of via
holes should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request. This evalua-
tion board is designed for single ended input test-
ing. J2 and J3 provide differential output signals.
5 - 24
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com