HMC350MS8
/
350MS8E
v02.0705
GaAs MMIC HIGH IP3 SINGLE-
BALANCED MIXER, 0.6 - 1.2 GHz
Evaluation PCB
7
MIXERS - SMT
List of Materials for Evaluation PCB 101830
Item
J1, J2, J3
U1
PCB
[2]
Description
PCB Mount SMA RF Connector
HMC350MS8 / HMC350MS8E Mixer
101828 Eval Board
[1]
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
as shown is available from Hittite upon request.
7 - 224
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
