HMC310MS8G / 310MS8GE
v03.0607
BLUETOOTH & 2.4 GHz WLAN
GaAs MMIC TRANSCEIVER
8
LOW NOISE AMPLIFIERS - SMT
Evaluation PCB
Note:
DC blocking capacitors on the Tx and ANT
ports are required to evaluate this part. These
capacitors may not be required in the final cir-
cuit design if interfacing components are DC
blocked.
List of Materials for Evaluation PCB 103339
[1]
Item
J1, J2, J3
J4, J5
C1
C2, C3
U1
PCB
[2]
Description
PCB Mount SMA Connector
DC Pins
.01 μF Capacitor, 0603 Pkg.
100 pF Capacitor, 0603 Pkg.
HMC310MS8G / HMC310MS8GE Transceiver
Evaluation Board 1.5” x 1.55”
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
8 - 12
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
