HMC214MS8
/
214MS8E
v01.1109
HIGH IP3 GaAs MMIC
MIXER, 2.4 - 4.0 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1
LO
This pin is DC coupled & matched to 50 Ohms. Blocking
capacitors are required if line potential is not equal to 0V.
9
MIXERS - SINGLE & DOUBLE BALANCED - SMT
2, 4
N/C
The pins are not connected internally; however, all data shown
herein was measured with these pins connected to RF/DC
ground externally.
This pin must be connected to RF ground.
This pin is DC coupled. For applications not requiring operation
to DC this port should be DC blocked externally using a series
capacitor. Choose value of capacitor to pass IF frequency
desired. For operation to DC, this pin must not sink/source
more than 40 mA of current or failure may result.
3, 6, 7
GND
5
IF
8
RF
This pin is DC coupled
and matched to 50 Ohms.
9 - 82
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HITTITE [ HITTITE MICROWAVE CORPORATION ]
