Hebei I.T. (Shanghai) Co., Ltd.
.
LED SPECIFICATION
Part No./型号:PLCC6W6
拆开包装袋之后:产品应该在拆封后的72小时内焊接完毕;如果没用完,产品应该储
存在带有干燥剂的防潮包装袋中;如果产品超出了使用期限或者干燥剂失效,那么产品在
使用前必须在60±5℃中烘烤至少24小时;建议客户尽快的使用完产品。
10.3 Heat Generation/产品热量的产生
Thermal design of the end applications are of paramount importance. Please consider the
heat generation of the LED when making the system design. It is necessary to avoid intense heat
generation and operate within the maximum ratings given in this specification.
应用产品的热学设计是至关重要的。在做系统设计时,请考虑LED的散热,避免热量
的积累,必须严格的在允许的温度范围内使用。
10.4 Soldering/焊接
10.4.1 Lead Solder/回流焊接
10.4.2 Lead – Free Solder/无铅回流焊接
www.ledz.com
10/12
PDF created with pdfFactory Pro trial version www.pdffactory.com