SURFACE MOUNT DEVICE LED
Part No. : L-C150KGCT
REV:A / 03
5. Drive Method
Circuit model A
Circuit model B
(A)Recommended circuit.
(B)The difference of brightness between LED`s could be found due to the Vf-If characteristics of LED.
6.Reliability Test
Classification
Test Item
Test Condition
Reference Standard
Ta= Under Room Temperature As Per Data
Sheet Maximum Rating
MIL-STD-750D:1026 (1995)
MIL-STD-883D:1005 (1991)
JIS C 7021:B-1 (1982)
Operation Life
*Test Time= 1000HRS
(-24HRS,+72HRS)*@20mA.
High Temperature
High Humidity
Storage
IR-Reflow In-Board, 2 Times
Ta= 65±5℃,RH= 90～95%
*Test Time= 1000HRS±2HRS
MIL-STD-202F:103B(1980)
JIS C 7021:B-11(1982)
Endurance Test
High Temperature
Storage
Ta= 105±5℃
MIL-STD-883D:1008 (1991)
JIS C 7021:B-10 (1982)
Test Time= 1000HRS (-24HRS,72HRS)
Low Temperature
Storage
Ta= -55±5℃
JIS C 7021:B-12 (1982)
*Test Time=1000HRS (-24HRS,72H RS)
MIL-STD-202F:107D (1980)
MIL-STD-750D:1051(1995)
MIL-STD-883D:1010 (1991)
JIS C 7021:A-4(1982)
Temperature
Cycling
105±5℃
-55±5℃
10mins
10mins
100 Cycles
100 Cycles
IR-Reflow In-Board, 2 Times
105±5℃
10mins
MIL-STD-202F:107D(1980)
MIL-STD-750D:1051(1995)
MIL-STD-883D:1011 (1991)
Thermal
Shock
-55℃±5℃
10mins
Environmental
Test
MIL-STD-202F:210A(1980)
MIL-STD-750D:2031(1995)
JIS C 7021:A-1(1982)
Solder
Resistance
Tsol= 260 ± 5℃
Dwell Time= 10 ± 1sec
MIL-STD-202F:208D(1980)
MIL-STD-750D:2026(1995)
MIL-STD-883D:2003(1991)
IEC 68 Part 2-20
Tsol= 235 ± 5℃
Immersion time 2±0.5 sec
Immersion rate 25±2.5 mm/sec
Solder ability
Coverage ≧95% of the dipped surface
JIS C 7021:A-2(1982)
7.Others:
The appearance and specifications of the product may be modified for improvement without notice.
DRAWING NO. : DS-71-03-0005
DATE : 2004-06-07
PAGE
10
HB [ HB ELECTRONIC COMPONENTS ]
