5.0 mm
LEAD STRENGTH
DIA LED
560MY8C
LAMP
REV:A
/ 0
1) Bend strength
Do not bend the lead more than twice. (Fig.9)
Fig.9
2) Tensile strength (@Room Temperature)
If the force is 1kg or less, there will be no problem. (Fig.10)
OK！
1Kg
Fig.10
HANDLING PRECAUTIONS
Although rigid against vibration, the LEDs may damaged or scratched if dropped. So take care
when handling.
CHEMICAL RESISTANCE
1) Avoid exposure to chemicals as it may attack the LED surface and cause discoloration.
2) When washing is required, refer to the following table for the proper chemical to be sued.
(Immersion time: within 3 minutes at room temperature.)
SOLVENT
Freon TE
Chlorothene
Isopropyl Alcohol
Thinner
Acetone
Trichloroethylene
⊙--Usable
ADAPTABILITY
⊙
╳
⊙
╳
╳
╳
NOTE: Influences of ultrasonic cleaning of the LED
resin body differ depending on such factors
as the oscillator output, size of the PC board
and the way in which the LED is mounted.
Therefore, ultrasonic cleaning should only be
performed after confirming there is no problem by
conducting a test under practical.
╳--Do
not use.
DRAWING NO. : DS-35-04-0744
DATE : 2004-12-03
Page :
7
HB [ HB ELECTRONIC COMPONENTS ]
