BLOCK CHARACTERISTICS
GAdapter Block A10030-01, -02
The A10030-01 is an adapter block for connecting a PMT module to
each block. The A10030-01 adapter block has M4 and M3 screw holes
for securing to an optical bench or optical stage. A mini-post can also
be attached to the M4 screw holes.
Applicable mini-post: OptoSigma Model 155-0XXX
SPECIFICATIONS
Type No.
A10030-01
A10030-02
Weight
Effective Beam Size
8 mm
Approx. 18 g
12 mm*
* When connected to other optical blocks, their effective optical path diameters
take precedence.
Dimensional Outlines (Unit: mm)
A10030-01
26.0 0.1
GASKET
10.8 0.1
15.0 0.1
NOTE: Avoid frequently attaching and detaching from PMT
module.
4-M2
(THUMB SCREW
FOR PMT MODULE)
COMPATIBLE PMT MODULES
H10720/H10721/H10722/H10723/H11706
A10030-01 H12056/H10682/H11890/H11526
H10799 (built-in photodiode)
2-M3 DEPTH 3
(MOUNTING THREADED HOLE)
M4 DEPTH 5
(MOUNTING THREADED HOLE)
0.5
A10030-02 H7826/H7827/H7828
8
4
TPMOA0050EA
A10030-02
27.0 0.1
18.0 0.1
15.5 0.1
GASKET
10.5 0.1
4-M2
(THUMB SCREW
FOR PMT MODULE)
2-M3 DEPTH 4
(MOUNTING THREADED HOLE)
M4 DEPTH 5
(MOUNTING THREADED HOLE)
0.5
8
4
TPMOA0085EA
GC-Mount Adapter Block A10039
One end of this adapter block has a C-mount (male threads) that con-
nects to the H7421 series or H7422 series PMT module, while the oth-
er end couples to another optical block. This adapter block also con-
nects to a commercially available device with a C-mount.
This adapter block can also be connected to commercially sold C-
mount products.
SPECIFICATIONS
Type No.
Weight
Effective Beam Size
8 mm
A10039
Approx. 27 g
* Supplied: C-mount double female thread ring.
Dimensional Outlines (Unit: mm)
C-MOUNT (MALE)
4
How to connect a C-mount adapter block
22.0 0.1
16.5 0.2
3.5 0.1
TACCA0287EA
3. Turn the adapter block
body counterclockwise
so that it is positioned
at the desired angle
and then tighten the
four screws.
1. Loosen the four screws 2. Insert the C-mount ring
on the adapter block
and make sure the C-
mount ring is separated
about 1 mm from the
adapter block body.
into the C-mount of the
PMT module and turn
the adapter block body
clockwise until it stops.
4
HAMAMATSU [ HAMAMATSU CORPORATION ]
